www.astrosatellite.com HEAD-END Astro Satellite

Home » HEAD-END » All Products

 Checkout

10-Outlet Power Strip

Details 

Standard rack-mounted power strip containing 10 surge protected AC outlets and a relay switch for over-current protection and a power rating of 15 amps.
Price: Quote it!
Add to cart

AHC-16-860 Active Combiner

Details 

The AHC-16-860 is a high isolation, 16 channel active head combiner. With its internal CATV hybrid push-pull amplifier, the AHC-16-860 is able to compensate for its insertion loss and drive the cable system as well. The AHC-16-860 features a front panel gain control and a -20 dB test port.
Price: Quote it!
Add to cart

Blank Faceplate - Mini Mod System

Details 

Blank faceplate for mini mod. This product has no functionality to it, only to fill empty channel slots.
Price: Quote it!
Add to cart

Digital QAM Modulator

Details 

Wide range of applications - commercial settings, hospitality, multi dwelling units, stadiums, educational campuses, healthcare, etc. Direct connection to satellite or cable receivers – redistribute high-quality content on-premise or campus-wide. Component video and digital audio interfaces allow for simple connections. Rack Chassis eases installation – holds and powers up to eight HDbridge modules, and includes an RF combiner and amplification. Provides one AC and one RF connection. LAN port for remote management and configuration – monitor and configure modules remotely, allowing for channel and content changes without needing to be on site. Coax wiring – easily integrate and balance into new or existing MATV/SMATV RF distribution systems to add an HD tier of video feeds. Built to last - steel enclosure, rack mounting, robust power supply, internal unit fans, and commercial cable-grade components.
Price: Quote it!
Add to cart

HCA Rack Mounted Amplifiers

Details 

Holland's HCA-3051RK and HCA-3086RK are high-output hybrid rack-mountable amplifiers perfect for any head-end system. These high performance amplifiers use push-pull CATV hybrid circuitry providing extremely low noise and distortion. Front panel adjustable slope and gain controls allow easy system balancing.
Price: Quote it!
Add to cart

HCG Series Passive Combiners

Details 

The HCG-12 and HCG-24 are 12 and 24 input passive head-end combiners, intended to combine multiple modulator and processor inputs into one output while maintaining the highest isolation between ports. The HCG-12 and HCG-24 offer 1 GHz passband performance.
Price: Quote it!
Add to cart

HDD Digital Demodulator

Details 

The HMDD Demodulator permits the delivery of digital television signals in analog format directly to a television. They also interface easily with existing analog modulators on CATV networks. This high performance digital receiver allows for the reception and demodulation of an 8VSB (Off-air SD/HD digital TV Signal) or QAM (Digital CATV) signal into a baseband NTSC video and audio output.
Price: Quote it!
Add to cart

HDM-1

Details 

The HDM-1 frequency agile demodulator is designed to receive and demodulate all UHF, VHF, and CATV channels to baseband audio, video and multiplex signals. The HDM-1 uses a microprocessor driven PLL synthesized tuning circuit to assure precise tuning and accuracy. The microprocessor controls all functions and provides for easy channel selection using front panel channel up/down buttons and a large LED display.
Price: Quote it!
Add to cart

Head End Options

Details 

Price: Quote it!
Add to cart

Head End Rack System

Details 

The MOR-71 is a standard 71" equipment rack. The rack is solidly constructed from 12-gauge steel with fine-thread panel mounting screw holes and a scratch resistant grey hammer-tone finish. The rack has multiple shelving options and a mounting capacity of up to 40 1 3/4" rack devices. The vertical structure is suitable for all industry standard 19" panel widths and rack footprint is 2' x 2' for added stability. Meets EIA standard RS310C 19" rack spacing.
Price: Quote it!
Add to cart

Head End Required Components

Details 

Price: Quote it!
Add to cart

Head-End System

Details 

Holland Electronic's Mini Modular Head-End System consists of 12-slot mounting chassis and power supply capable of holding any combination of 12 high-quality SAW modulators and/or demodulators.
Price: Quote it!
Add to cart

HMA Series

Details 

The HMA-550H and the HMA-860H are commercial grade, SAW filtered, frequency agile modulators specifically designed to meet the highest CATV performance standards. All channels are easily selected using front panel buttons and verified with an easy-to-read LED channel display. The modulators feature extremely low out-of-band noise allowing their use in large channel capacity head-ends. The HMA-550H and the HMA-860H modulators are the ideal choice for any system where performance, flexibility, and reliability are required.
Price: Quote it!
Add to cart

HMDD Digital Demodulator

Details 

The HMDD Demodulator permits the delivery of digital television signals in analog format directly to a television. They also interface easily with existing analog modulators on CATV networks. This high performance digital receiver allows for the reception and demodulation of an 8VSB (Off-air SD/HD digital TV Signal) or QAM (Digital CATV) signal into a baseband NTSC video and audio output.
Price: Quote it!
Add to cart

HMDS

Details 

The HMDS is a commercial grade frequency agile mini demodulator for use with Holland’s Modular Head-End System. With SAW filtering and PLL controlled oscillators for enhanced adjacent channel performance.
Price: Quote it!
Add to cart

« Previous | 1 | 2 | »

� 2010 Astro Satellite, Inc. All Rights Reserved.